Oil-injected and oil-free screw refrigeration compressors are two different approaches used in industrial refrigeration systems. The main difference lies in whether oil is introduced into the compression chamber during the compression process.
Oil-injected and oil-free screw refrigeration compressors represent two different technology approaches in the design of compressors using screw rotors.
In industrial refrigeration systems, the compressor is the equipment that creates the pressure difference required for the refrigerant to circulate throughout the system.
For oil-injected screw compressors, oil is introduced into the compression process to support lubrication, sealing, and temperature control. After leaving the compression chamber, the oil is separated from the refrigerant stream and circulated back through the oil system.
Meanwhile, oil-free screw compressor designs limit the introduction of oil into the compression chamber through specialized mechanical solutions and rotor designs. However, “oil-free” does not mean that the entire machine contains no oil or lubrication system; the actual configuration must be determined according to the specific compressor design.
Therefore, when selecting compressors for cold storage, freezing systems, IQF systems, chillers, or food-processing plants, it is necessary to evaluate the overall operating conditions, rather than simply choosing between oil-injected and oil-free technology.
An oil-injected screw refrigeration compressor is a type of compressor in which oil is introduced into the compression process together with the refrigerant.
Two screw rotors rotate inside the compressor housing, creating working chambers with variable volumes.
During this process, the oil can perform several functions simultaneously:
Technical documentation for screw refrigeration compressors shows that oil is injected into the compressor to seal operating clearances and absorb a significant portion of the heat generated during compression. The oil then needs to be cooled and returned to the system.
Recommended image: A cutaway view of a screw compressor clearly showing the rotors, compressor housing, bearings, and oil circuit.
The exact construction varies depending on the model, but an industrial oil-injected screw compressor generally consists of the following main groups of components:
The compressor consists of a male rotor and a female rotor.
The two rotors create working chambers that allow the refrigerant to be drawn in, transported, and compressed.
The housing surrounds the rotors and provides highly precise working surfaces.
The motor supplies the power required to rotate the main rotor.
Depending on the configuration, the oil system may include:
Many compressors use a slide valve or an equivalent control mechanism to adjust refrigeration capacity.
Technical documentation on screw compressors shows that a slide valve can be used to control the actual amount of refrigerant being compressed, thereby adjusting compressor capacity.
This system includes sensors, switches, controllers, and protection functions designed to monitor:
The operating process can be summarized as:
Refrigerant suction → Rotor chamber filling → Oil injection → Compression → Discharge of refrigerant-oil mixture → Oil separation → Oil circulation
As the rotors rotate, refrigerant enters the suction chamber.
The refrigerant-filled chambers are then closed and move along the rotors.
The volume of the chambers gradually decreases, causing the refrigerant pressure to increase.
During this process, oil is injected into the compression chamber to help provide sealing and absorb heat.
After compression, the refrigerant-oil mixture leaves the compressor.
The oil is separated from the refrigerant through the oil separation system and is then cooled, filtered, and circulated back into the compressor.
This is one of the most important characteristics distinguishing oil-injected screw compressors from oil-free designs.
An oil-free screw refrigeration compressor refers to a group of compressors designed not to introduce lubricating oil directly into the compression chamber, according to the specific technology used.
The main objective of this design is to separate the refrigerant compression process from the oil system.
To achieve this, the compressor may incorporate technical solutions such as:
Therefore, when using the term “oil-free,” it is important to refer to the manufacturer's technical documentation.
It should not be assumed that the entire compressor is completely free of oil in every component.
Compared with oil-injected compressors, oil-free designs may require more complex mechanical solutions to control clearances and synchronize the rotors.
The components may include:
The actual configuration varies depending on the technology used by each manufacturer.
Suggested image: A cutaway image of an oil-free compressor, preferably showing the rotors and synchronizing gear system.
The basic operating principle remains:
Suction → Compression → Discharge
However, the compression process does not rely on direct oil injection into the compression chamber as in an oil-injected compressor.
The rotors rotate and create chambers with changing volumes.
The refrigerant is drawn into the compression chamber, transported, and compressed as the chamber volume decreases.
The key point is that the design must precisely control:
This is why oil-free screw compressor construction can be complex and requires a high degree of manufacturing precision.
| Criteria | Oil-Injected Screw Compressor | Oil-Free Screw Compressor |
|---|---|---|
| Oil in compression chamber | Yes | No, according to the compression-chamber configuration of the technology |
| Lubrication of compression chamber | Yes | No direct oil lubrication |
| Oil-based sealing | Yes | No |
| Oil separation | Important function | Not based on the same oil-injected principle |
| Clearance control | Important | Very important |
| Compression cooling | Supported by oil | Based on a dedicated design |
| Construction | Common in industrial refrigeration | Depends on the technology |
| Maintenance | Focuses on oil, oil filtration, and oil separation | Focuses on rotors, bearings, seals, and dedicated systems |
| Applications | Very broad | Depends on specific requirements |
| Equipment selection | Based on refrigeration load and operating conditions | Based on technology and application requirements |
Oil helps seal the clearances between the rotors and compressor housing.
This helps reduce internal leakage during the compression process.
Oil absorbs part of the heat generated during compression.
Therefore, controlling oil temperature is an important part of system design.
Screw compressors are widely used in systems with large refrigeration loads and long operating hours.
A slide valve or other control systems can be used to adjust compressor capacity according to the actual refrigeration load.
They can be found in:
Because oil comes into contact with the compression process, the oil system must be properly controlled.
Important factors include:
If the oil separation or oil return system does not operate properly, oil may enter the refrigeration system and affect system performance.
Therefore, oil management is one of the most important maintenance tasks for an oil-injected screw compressor.
Oil-free technology has the important advantage of reducing dependence on oil within the compression chamber itself.
This can make it suitable for applications with specific oil-control requirements.
In addition, separating the compression process from the oil system may help reduce certain oil-related issues in the refrigerant stream, depending on the specific technology.
However, the entire system should be evaluated rather than focusing solely on the “oil-free” advantage.
Oil-free compressors are not always the better choice.
This technology has its own technical requirements.
Important factors to control include:
Therefore, selecting an oil-free compressor should be based on the technical requirements of the refrigeration system and the manufacturer's documentation.
There is no universal answer for every refrigeration system.
The selection should be based on:
The larger the refrigeration load, the greater the requirements placed on the compressor.
The exact refrigerant used by the system must be determined.
Examples include:
Not every compressor is compatible with every refrigerant.
Evaporating temperature directly affects the compressor's operating conditions.
A high condensing temperature can increase the compression ratio and the required compressor power.
It is necessary to consider whether the system operates under:
Particular attention should be paid to:
Screw compressors are used to provide refrigeration capacity for chilled and frozen storage facilities.
They meet the high refrigeration loads required by industrial freezing lines.
Applications include:
Screw compressors can be used as the refrigeration source for Individual Quick Freezing systems.
They can be used to supply chilled water or secondary refrigerant for production processes.
They support many processes requiring temperature control during production and storage.
Before selecting equipment, businesses should determine:
| Parameter | Information to Determine |
|---|---|
| Refrigeration capacity | kW or RT |
| Refrigerant | NH₃, CO₂, R134a, etc. |
| Evaporating temperature | Actual operating conditions |
| Condensing temperature | Design conditions |
| Motor power | According to compressor requirements |
| Load conditions | 100%, 75%, 50%, etc. |
| Capacity control | Slide valve/VFD/other solutions |
| Oil system | If an oil-injected compressor is used |
| Control system | PLC and protection devices |
| Environmental conditions | Temperature, cooling water, ventilation |
These factors provide an important basis for selecting the correct model rather than choosing equipment based solely on motor power.
The following should be inspected:
Particular attention should be given to:
Maintenance schedules should not be based on a single fixed interval for every compressor. They should be determined according to the model, operating conditions, and manufacturer's recommendations.
Some signs that require inspection include:
The cause should not be determined based on a single symptom.
The compressor, oil separator, condenser, evaporator, expansion valve, piping, and control system should be inspected together.
Oil-injected and oil-free screw refrigeration compressors both have their own roles in industrial refrigeration.
Oil-injected compressors use oil for lubrication, sealing, and supporting temperature control during compression. This is a very common configuration in industrial refrigeration systems.
Meanwhile, oil-free compressors use other technical solutions to minimize oil within the compression chamber and meet specific application requirements.
Therefore, it should not be simply concluded that oil-injected compressors are better than oil-free compressors, or vice versa.
The appropriate solution should be selected based on:
Refrigeration capacity + refrigerant + evaporating temperature + condensing temperature + load conditions + operating requirements + maintenance conditions.
For industrial refrigeration projects, selecting the right compressor from the beginning helps the system operate reliably, minimize operational risks, and optimize long-term performance.
Công Nghiệp BA can provide consultation on compressor and industrial refrigeration system solutions based on the actual operating conditions of each project.
ĐÁNH GIÁ SẢN PHẨM