A water-cooled chiller is a central cooling system widely used in factories, industrial zones, and large-scale buildings. This system uses electrical energy to separate heat into two parts: cooling energy and heat energy.
Cooling energy is used to produce chilled water for air conditioning systems or industrial production cooling.
Heat energy is discharged to the environment through a cooling tower.
Thanks to its high efficiency and stable operation, the water-cooled chiller system is especially suitable for projects requiring continuous cooling and high cooling loads.
A water chiller system consists of four main components:
The evaporator is where water is cooled. There are three common types:
Water flows inside tubes while refrigerant evaporates outside
Equipped with sinusoidal flow baffles
High heat exchange efficiency and easy maintenance
Applied to chillers with capacities from 100 tons and above
Refrigerant boils around water tubes
Very high heat transfer efficiency
Commonly used in the food and chemical industries
Ensures water quality and corrosion resistance
Operates effectively with water pH outside the 6.5–7.5 range
The compressor is the “heart” of the chiller system and includes four main types:
Piston compressor: small capacity, residential or small systems
Scroll compressor: efficient, large refrigerant flow
Screw compressor: high capacity, stable operation
Centrifugal compressor: from 60 tons to several thousand tons
A water-cooled chiller system consists of five main parts:
Central Water Chiller Unit
Chilled water piping and pump system
Direct load equipment: AHU, FCU, PAU, PHE
Indirect air distribution system: air ducts, VAV, dampers
Cooling water circulation system and cooling tower
This system is suitable for large-scale projects due to its stable heat dissipation and cooling capacity ranging from 5 tons to over 1,000 tons. However, it requires high initial investment costs and a stable water supply.
The operating process includes the following steps:
Water is cooled to 7°C by the chiller
Chilled water is pumped to AHU/FCU units
Indoor air temperature is reduced through heat exchange
After heat exchange, water temperature rises to approximately 12°C
Warm water returns to the chiller to continue the cycle
This cycle repeats continuously to maintain stable indoor temperatures.
Wide temperature range from 60°C down to 30°C
Applications: plastics, printing, mechanical cooling, concrete mixing, chemical processing, food and beverage industries
Narrow temperature range from 7°C to 12°C
Applications: hospitals, shopping malls, textile factories, pharmacies
Large capacity, from a few tons to thousands of tons
Stable 24/7 operation
High efficiency and long-term energy savings
Long equipment lifespan
Ideal for large-scale projects
High initial investment cost
Requires a dedicated machine room
Complex maintenance and servicing
Dependent on water supply
High electricity consumption
Industrial cooling: plastics, mechanical engineering, chemicals, food processing
Central air conditioning: hospitals, shopping malls, large factories
Production lines requiring stable temperatures
24-hour operation: compressor oil replacement every 6 months
8-hour operation: oil replacement every 12 months
Oil must comply with manufacturer specifications
Tower cleaning: once per month
Condenser and evaporator cleaning: every 3 months
For chillers over 200 tons, Hydroball cleaning technology is recommended
If chilled water pipes are not properly insulated, the following issues may occur:
Condensation causing building damage
Rust and corrosion of pipes and accessories
Energy loss
Vibration due to thermal expansion
Proper insulation is essential to ensure system efficiency and longevity.
Specialized PU/PIR foam insulation offers:
Operating temperature range: -180°C to +120°C
B1 fire resistance rating
Seamless, joint-free insulation layer
Excellent thermal insulation performance
Service life up to 50 years
Environmentally friendly, mold-resistant, non-corrosive to pipes
The water-cooled chiller system is a high-efficiency, stable, and durable cooling solution, ideal for large buildings and industrial production. To ensure optimal performance, proper system design, correct maintenance practices, and especially high-quality pipe insulation are essential.
ĐÁNH GIÁ SẢN PHẨM